- Sorry, this product cannot be purchased.
-
Sale!
KAYAK KIT is a complete care pack for rigid or inflatable kayaks. Step 1 is a super fast acting cleaner and Step 2 is a shine enhancing, anti-static coating to reduce resistance in the water, you'll actually feel the difference! STEP 1: Is a specially formulated mix of low foaming detergents to gently remove salt, algae and mud staining from inflatable or rigid kayak. -
Sale!
KAYAK KIT is a complete care pack for rigid or inflatable kayaks. Step 1 is a super fast acting cleaner and Step 2 is a shine enhancing, anti-static coating to reduce resistance in the water, you'll actually feel the difference! STEP 2: Is a mix of thinned wax's and shine enhancers that quickly bond to the surface and help to fill scratch marks or imperfections giving less resistance in the water. -
Out of stock
Fits any Viking kayak and most of the sit on top kayakFeatures :
- These stoppers can be used to plug the scupper holes in your kayak and help you stay dry while you are paddling.
- High quality rubber material, strong and durable, and it will serve you for years.
- Easy to install and use, just put it on the kayaks drainage holes to prevent water coming up through and to also drain water out from the cockpit.
- TWO SIZES:
- SMALL : 40 mm at widest, tapering to 30 mm
- LARGE : 55 mm wide on the bottom
-
Sale!
Product description
-
Sale!
- Suitable for Kayak, Canoe, Sup and Dragon Boat Paddles
- Suitable for all kinds of racket
- Suitable for transformers, coils, motors, automotive wiring harnesses, aluminum alloy pipes, sewer pipes
- NOT suitable for SUP paddles as it will be slippery when wet
-
Out of stock
The Sup Rail Tape backed by 3M adhesive is a clear heavy duty PVC UV stable tape that goes down the rail of your stand up paddleboard to protect form paddle hits and chips. The SUP Rail Tape will prevent 90% of the chips and scratches from paddle hits on the side of your board. Sold per metre. -
Out of stock
The Bixpy K-1 Angler Pro Outboard Kit™ is Bixpy’s pro version of the new K-1 Outboard Kit. The Angler Pro Outboard Kit is supplied with a 768wh battery, rather than the 378wh battery. This allows anglers to stay out longer and explore more distant waters and troll for hours. The K-1 Motor is roughly 20% shorter in length than its predecessor, the J-2 Motor, yet offers the same massive output the J-2 motors provided in a quieter, more sleek, and more rugged aluminum housing.- Runs the Bixpy K-1 Motor for 2 + hours at top speed and up to 24 hours at slower speeds – continuous!
- Warp speed feature allows you to reach max speed with a double click
- Built-in standard rail system
- Quick release motor can be removed with just one bolt Operates via bluetooth remote control with 13 forward speeds and 3 reverse speeds
- Powered by a rechargeable 25.6 V lithium-ion phosphate battery core (768 Wh)
- Waterproof and dirt-proof with corrosion-resistant components and aluminum body
- Remote control floats in case of accidental slippage
- Safety: High quality magnetic kill leash
- Water use: Rugged anodized aluminum body for salt water or fresh water use
-
Out of stock
Special Introductory Pricing, Limited Stocks The Bixpy K-1 Motor is a compact, lightweight, high-performance marine motor designed and optimized specifically for personal water propulsion and small watercraft such as kayaks, dinghies canoes, paddle boards, etc... While most marine motors try to achieve more power using larger batteries and propellers, Bixpy has completely reinvented the trolling motor by borrowing technologies from hydro-electric dam turbines, jet engines and airfoil technics used in aerospace applications.- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water Use: Anodized aluminum body for salt water or fresh water use
- Cable attachment - permanently attached directly to the motor
- Quick release motor can be removed with just one bolt
- Warp Speed (Reach max speed with a double click)
- Airfoil fin for better tracking
- Water cooled for better efficiency
- Works with more than 20 different Bixpy K-1 Mounting Adapters
-
Out of stock
The Bixpy J-2 Outboard Kit is Bixpy's second major iteration to its, now famous, jet propulsion system that has motorized thousands of kayaks, paddle boards (SUPs), dinghies, float-tubes and all kinds of personal water craft over the last 4 years.- Runs for approximately 80 minutes at top speed and up to 12 hours at slower speeds
- Ultralight setup (weighs just 9 lb including battery and motor)
- Operates via wireless remote control with 12 forward speeds and 3 reverse speeds
- Waterproof and dirt-proof with corrosion-resistant components
- Outboard Power Pack and remote control floats in case of accidental slippage
- Built in wire harness with 1.5m (5') power cable included for hassle free connection to your adapter
-
Out of stock
The Bixpy K-1 Angler Pro Outboard Kit™ is Bixpy’s pro version of the new K-1 Outboard Kit. The Angler Pro Outboard Kit is supplied with a 768wh battery, rather than the 378wh battery. This allows anglers to stay out longer and explore more distant waters and troll for hours. The K-1 Motor is roughly 20% shorter in length than its predecessor, the J-2 Motor, yet offers the same massive output the J-2 motors provided in a quieter, more sleek, and more rugged aluminum housing.- Runs the Bixpy K-1 Motor for 2 + hours at top speed and up to 24 hours at slower speeds – continuous!
- Warp speed feature allows you to reach max speed with a double click
- Built-in standard rail system
- Quick release motor can be removed with just one bolt Operates via bluetooth remote control with 13 forward speeds and 3 reverse speeds
- Powered by a rechargeable 25.6 V lithium-ion phosphate battery core (768 Wh)
- Waterproof and dirt-proof with corrosion-resistant components and aluminum body
- Remote control floats in case of accidental slippage
- Safety: High quality magnetic kill leash
- Water use: Rugged anodized aluminum body for salt water or fresh water use
-
Sale!
Pre-order Yours Now - Limited Stock Available By 14/03/2024What's The Difference Between Bixpy PP-77-AP And Any Other Lithium Battery?
The major difference is that Bixpy PP-77-AP is Lithium Iron phosphate. They have far longer lifespans. Up to 10 years. They also have both 5V and 12V output with the 12V with a Max output of 20 Amps, which is great for things like inflatable pumps (10A battery will not run most pumps). Also, it’s a better fit and finish and additional connectors and more suited for the use. Fully water proof in aluminum housing. There’s a battery level indicator, cigarette lighter outlet, switched cable with a water proof switch and built in super fact USB outlet. So a Lithium Battery it is just a battery. Where as the PP-77 is a finished product with features and user interface. -
Sale!
With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.- Outer Shell material: ETFE Laminate
- Connection point: barrel connector
- Charges the PP-378 in: 6 to 10 hours
- Includes two anchor attachment points
- Waterproof and dirt-proof with corrosion-resistant components
- Fresh and saltwater ready
-
This adapter will allow you to attach the Bixpy Motor onto your paddle board or kayak within minutes. -
Sale!
The Bixpy Quick Swap Rudder Kit fits all Viking Kayaks that have a standard rudder fitted, simply swap the standard rudder for this Bixpy rudder. -
Sale!
The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your Bixpy Motor directly onto the rudder.- Mounts into any standard rudder 10mm pin hole
- Gravity deployment system
- 90° quick Slide & Stow feature
- Gravity "Lock-down" mechanism for reverse speeds
- 18in. x 4in. rudder blade
- Kick up feature for shallow water and hazards
- Removable cap for mounting Bixpy Jet Motor
- The top of the pin to the top of the motor measures 12.25 inches or 305 mm
- Pin length is 85 mm. Gap from pin to blade is 38 mm
- To work effectively, the Bixpy motor needs to be about 2" to 3" below waterline
-
Sale!
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
Sale!
The Hobie Twist & Stow Rudder Adapter replaces the Hobie Twist & Stow rudder with a Bixpy Rudder that enables you to mount a Bixpy J-2 Motor to your kayak’s rudder assembly. Steering is conveniently controlled using the steering handle.The Hobie Twist & Stow Rudder Bixpy J2 Adapter is very easy to install, with no holes or overly complex modifications required. Compatible with the newer J2 Bixpy Motor only. The beauty of this mounting system is that it will not sacrifice the MirageDrive, providing dual means of propulsion, and provides propelled steering capability. -
The Hobie® Pro Angler / Compass / Outback (2019 or newer) Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole hole adapter slot. -
The Bixpy WillFit Power-Pole Adapter allows you to easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot, providing a convenient stern-mounted motor option.- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
-
With the Universal Kayak Adapter, you can attach your Bixpy Motor to virtually any kayak, canoe or small watercraft. The aluminium pipes will adjust to accommodate virtually any length and configuration, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various watercraft. -
Sale!
With the Bixpy Universal Transom Adapter, you can attach your Bixpy Jet motor to virtually any small watercraft, dinghy or tender. The Bixpy is the perfect alternative to having a heavy, smelly and hard to start small petrol motor. It only weighs around 2kg with the motor attached, so anyone can lift it and easily attach it to your boat. -
The Pipe Locking Bracket is perfect for locking any stern mounted pole adapter in place for situation where you need your motor to hold position. The steering adapter bolts onto the vertical pipe swivel sleeve and tightens using stainless steel screws. Then the locking pin inserts into the gap of your pole clamp to lock your motor in the desired direction. -
Bixpy’s rudder cover plate for Hobie Pro Angler fishing kayaks is sturdier than the regular type, designed specifically as a sturdier mounting platform for a RAM ball to be mounted to facilitate the fitting of a Bixpy Universal Kayak / Canoe Adapter -
Sale!
Replacement charger for Bixpy Outboard Batteries that have a 2-pin charging port, including the PP-378 batteries supplied with J-2 Bixpy Outboard Motor Kits -
Connector caps protect your connectors during storage and transportation. When your motor is in use, remove your connector caps to prevent them from coming loose and getting lost. The Bixpy Connector Caps are held to the connector body with a small tether, that will not withstand the force of water while the Bixpy J-2 Motor is in use. So it is best to remove them while motoring. -
Inside o-ring for main power cables for all Bixpy Motors and batteries. -
Sale!
Leak-proof Performance:
The adapter is made of high-quality plastic materials and is resistant to pressure. It is long-lasting, with strong sealing and leak-proof performance and superior air leakage performance.Lightweight and Portable:
Because the adapter is lightweight and portable, it is easy to carry and store; there is no need to carry multiple types of inflating equipment. The multi-function valve adapter can suit all of your requirements and lighten your load.Wide Application:
The adapter is suited for all types of surf paddle boards, canoes, kayaks, inflatable boats, and inflatable beds.Easy to Inflate:
The adaptor makes it simple to inflate and deflate boats. With the gasket inside, there will be no air leakage between the adapters.Fast Connection:
The adapter allows for a quick connection between the hand pump valve adaptor and other valve adapters. -
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
Sale!
The Bixpy Outboard Remote Control V2 is for all Outboard Batteries that have blue LED battery status lights The remotes features forward and reverse speeds in addition to a "dead stop" button. -
Out of stock
Now with 'Toe Tab' foot controls for superior control. The 'Angler' blade works brilliantly - there is no need for an up haul. For installation instructions go to the 'How To' section. Will fit any of the Viking Profish kayaks A rudder system will make your kayak much easier to manage in windy conditions and also when paddling in strong currents. -
Sale!
- Drip Rings
- A good all-round paddle for general use.
- Handy notched blades are useful when fishing around mussel farms as you can pull yourself back by hooking over the ropes to reduce drifting
- Shaft can be unclipped to reduce length which makes it easier to fit into your vehicle
- Total length 223cm
-
Sale!Out of stock
- Propelz Speed two piece Fibreglass Paddle
- Fully adjustable for length & blade angle
- Drip Rings
- Handy notch in blade
- Comes apart to fit in car
- Adjustable length - 220 - 230cm
-
Sale!
This SUP cover has all the important features to keep your beloved SUP safe including uv reflective tarpee, 5mm shock-absorbing foam, handle, a protective nose panel, a deck slit to access your SUP handle and a fin slot. You can trust that the Barry Basic will keep your SUP well protected. The bag can fit 1 board.- EXTRA PROTECTION : Extra Tough 600D protective fabric in high impact areas. Top Side (Nose & Tail) / Bottom Side (Nose).
- UV REFLECTIVE TARPEE : Thick, heavy duty outer fabric. Water proof, UV and stain resistant designed to reflect heat and protect boards.
- THREE LAYERS OF PROTECTION : Top Layer: Thick UV reflective tarpee / 2nd Layer: Shock-absorbing foam. / 3rd (inside) Layer: Tarpee lining.
- SHOULDER STRAP : Barry Day : Nylon dog clip at nose end and strap can be stashed inside cover. Barry Double: Totally detachable.
- HEAVY DUTY ZIPPERS : Large, non-corrosive nylon zips.
- HANGING HOOK : All covers supplied with patented removable hanging hook.
- REFINED TEMPLATE SHAPE : Updated template shapes. Refined to suit current board shapes.
-
Sale!Out of stock
Paddle board / SUP board bags. Many sizes available.- 10mm padding top and bottom
- Full opening zipper. Easy to put paddle board in and out of the bag
- Velcro fin slot
- Padded shoulder strap
- Tuff handle
- Pocket on the inside of bag
-
Sale!
The Trident Pro FG / Carbon Lever LockL adjustable SUP paddle delivers exceptional power output and control for the everyday paddler. This versatile paddle features the LeverLock ® system and has a medium size fibreglass blade that’s ideal for high cadence surf paddling, yet can also be used in flat water and open ocean conditions. -
Sale!
Two Piece Paddle Replacement Snap Lock is made of stainless steel. A useful part to have in your field repair kit.