- Easy to Insert and Remove
- Fits all Viking Kayaks (Replaces the Hatch Bag system)
-
Sale!
Viking Standard Hatch Bucket -
Sale!
The RAILBLAZA StarPort is a unique and versatile multifunctional mount which allows users to fit and re-task the full range of RAILBLAZA accessories.Made from high-grade engineering plastics, the StarPort is easily installed on kayaks, canoes, power boats, sail boats, ATVs, and more.- StarPort can be used as a deck or a flush mount
- Comes with gasket and cap
- Features slide locking mechanism
- Made from high-grade engineering plastics
- Accepts any RAILBLAZA accessory
- Installation hardware included
- Available in black or white
-
Viking Kayak Saddle & Screws- Nylon Saddle measures 35mm
- Price is for 1 x Nylon Saddle plus 2 x S/S Self Tapping Screws (no pre-drilling required)
- Add extra saddles to your kayak as attachment points for seats, leashes, dry bags etc.
-
Shock Cord 3.5mm Price is per Metre. Add + Quantity for longer lengths in multiples of metres. -
Now with 'Toe Tab' foot controls for superior control. The 'Angler' blade works brilliantly - there is no need for an up haul. For installation instructions go to the 'How To' section. Will fit any of the Viking Profish kayaks A rudder system will make your kayak much easier to manage in windy conditions and also when paddling in strong currents. -
Sale!
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
Sale!
Viking Kayak Handle (single)- Comfortable Rubber Grip surrounding a webbing strap.
- Rubber ends for extra strength.
- Can be added to the front, rear or sides of your kayak for easier handling
- Easily fitted using 8 x 10 gauge screws (Screws NOT INCLUDED)
-
Ladder lock pair only. For complete Strap Kit replacement, see C-Tug Replacement Strap Kit. -
Sale!
Make more room on your pontoon boat with the RAILBLAZA Pontoon Boat RailMount 28-32. This revolutionary base mount securely and easily attaches any StarPort RAILBLAZA accessories to your rails. It comes with all installation hardware, so there’s no drilling required – just attach, move and go.- Rubber inserts avoid slippage when attached to rails
- StarPort locking slide secures accessories in place
- UV stabilised plastic
- Unique design avoids interference with rail wall
-
For when you have lost the bung out of the rear of your kayak. Screws and gasket not included but can be ordered seperately if required (10g x 5/8) -
Sale!
Leak-proof Performance:
The adapter is made of high-quality plastic materials and is resistant to pressure. It is long-lasting, with strong sealing and leak-proof performance and superior air leakage performance.Lightweight and Portable:
Because the adapter is lightweight and portable, it is easy to carry and store; there is no need to carry multiple types of inflating equipment. The multi-function valve adapter can suit all of your requirements and lighten your load.Wide Application:
The adapter is suited for all types of surf paddle boards, canoes, kayaks, inflatable boats, and inflatable beds.Easy to Inflate:
The adaptor makes it simple to inflate and deflate boats. With the gasket inside, there will be no air leakage between the adapters.Fast Connection:
The adapter allows for a quick connection between the hand pump valve adaptor and other valve adapters. -
Sale!
The Railblaza Slimeline Kayak Track will fit neatly onto the deck of most fishing kayaks. Stainless steel fitting screws included -
The kayak paddle drip ring is used to prevent excess water from flowing down the paddle shaft without paddle movement.- Adopting quality rubber material, the kayak paddle drip ring is durable, solid and strong enough.
- Easy to install on the port and starboard side of paddles.
- Ideal drip rings keep excess water from running down the paddle shaft while out on paddling excursions.
- Coming with 4 pcs in a package, you can use them for long time, and it is very practical.
- Fit for most kayak canoe paddles. Inner diameter: approx. 30mm/1.18inch.
- Suitable for 1-1/8" to 1-1/4" diameter shafts.
-
Sale!
Centre well cover - Profish 400 Clear Lid with Bait Board - a must for your Profish 400 Centre Console Bin. Simply access you're bin by unhooking the bungey loops. The tough clear cover means that you can see what is inside before you open it up! -
The Pipe Locking Bracket is perfect for locking any stern mounted pole adapter in place for situation where you need your motor to hold position. The steering adapter bolts onto the vertical pipe swivel sleeve and tightens using stainless steel screws. Then the locking pin inserts into the gap of your pole clamp to lock your motor in the desired direction. -
Sale!
Features:
- Fit heavy-duty RAILBLAZA HEXX™ Products to an 3 1/3" elevated surface mount- Compatible with HEXX Live Pole 60 & Live Pole 30, HEXX Fish Finder Mount, HEXX Rotating Platform and HEXX Rod Holder -
Versatile 15-foot inflatable kayak with drop-stitch floor and aluminum frame. Easily converts from solo to tandem. Fast setup and superior performance. -
Sale!
Viking Paddle Replacement Pin/Snap Lock is made of stainless steel. A useful part to have in your field repair kit. -
Lightweight, high-performance inflatable kayak with rigid drop-stitch floor and aluminum frame. Easy to transport, quick to inflate, and built for adventure. -
Sale!
Cheek adaptor x 2 with bolts black – Suitable for StowPod, DrinkHolds, and Hook2 adapter. -
Bixpy’s rudder cover plate for Hobie Pro Angler fishing kayaks is sturdier than the regular type, designed specifically as a sturdier mounting platform for a RAM ball to be mounted to facilitate the fitting of a Bixpy Universal Kayak / Canoe Adapter -
Lightweight and durable inflatable kayak with aluminum frame and open cockpit design. Easy to pack, quick to inflate — perfect for solo adventures. -
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
Lightweight, Rigid & Comfortable – The Ultimate Inflatable Kayak for Solo Adventurers
Experience the perfect blend of performance and portability with the AdvancedFrame Sport Elite Inflatable Kayak. Designed for solo paddlers seeking a lightweight yet robust kayak, this model features a high-pressure drop-stitch floor and patented aluminum rib-frame technology, offering impressive rigidity and tracking similar to hard-shell kayaks.
-
This kit contains all the parts required to install a fish finder in to a Profish 400 kayak. Including the transducer fit kit, the battery straps plus the waterproof fuse holder and terminals. You will need to use 'MS All Clear by Holdfast' sealant to waterproof the transducer scupper and cable entry points. To see how this is fitted follow the instructions in our "How To" guide. -
Discover the AdvancedFrame™ Expedition Elite Inflatable Kayak with Pump – a 13-foot hybrid kayak offering hard-shell performance, spacious comfort, and easy portability for extended paddling adventures. -
Sale!
Shorter than rod holders designed for boats so they keep your reel higher and drier. It also means they fit better in shallow draft kayaks. The flange dimensions are 59mm wide x 100mm long These come ready to install with a self sealing adhesive gasket and self-tapping screws. -
The RAILBLAZA C-Tug R Conversion Kit will make you next outdoor adventure a breeze. With just two 500mm rails and straps, you can easily convert your classic C-Tug cart to make fitting your canoe or kayak easier than ever.- Width adjustable hull rails
- Fits inside most kayak hatches
- Lightweight and easy to handle
- Compatible with both kiwi wheel and sandtrakz carts
- Non-slip rubber hull rails
-
Sale!
Blade is Ultra’s budget paddling vest that is high on features.- The internal belt system
- Adjustable shoulders
- Australian Standards Approved
- 150d Rip stop
- PE Foam Buoyancy
- Heavy duty 25mm belts
- Reinforced & bar tacked stress points
- Internal Belt System
- Lanyard attachment point
- Double Stitched & Bound seams
- Multi-Fit Design
-
Sale!
Replacement C-Clip Slide Lock 2 Per Pack -
Sale!
Not a fan of the hassle that comes with setting up, taking down, and storing a bimini top? We’ve got the perfect solution for you! Check out our RAILBLAZA Clevis Bimini Support Pair – they make it easy to attach and remove your cover without fuss. Enjoy an unobstructed view of the water no matter what activity you’re taking part in.- No more struggling with your bimini cover - RAILBLAZA Clevis Bimini Support Pair makes it super easy to attach and remove
- Click into any StarPort mount for easy use
- Perfect for fishing or other activities where you need a free area around the casting zone
- Snap in place and secure with a few quick turns
-
For holding your paddle to the side of the kayak, leaving your hands free for fishing. Simply attach it with the self tapping screws supplied. -
Connector caps protect your connectors during storage and transportation. When your motor is in use, remove your connector caps to prevent them from coming loose and getting lost. The Bixpy Connector Caps are held to the connector body with a small tether, that will not withstand the force of water while the Bixpy J-2 Motor is in use. So it is best to remove them while motoring. -
Sale!
For Stand up paddle board (SUP), Dinghy Boat, Surfboard, Inflatable Kayaks and boats and more... -
This kit contains all the parts required to install a fish finder in to a Profish Reload Tackle Pod. Including the transducer fit kit, battery straps plus the waterproof fuse holder and terminals. You will need to use 'MS All 202 Sealant by Holdfast' to waterproof the transducer scupper and cable entry points. Installation instructions are under the 'How to' tab on this website. -
The C-Tug replacement kickstand is a one piece part. The C-tug will need to be dismantled to allow fitting of the new part. -
Sale!
Replacement charger for Bixpy Outboard Batteries that have a 2-pin charging port, including the PP-378 batteries supplied with J-2 Bixpy Outboard Motor Kits -
Sale!
The K&S Superior Paddle Leash is the ultimate paddle leash, crafted using high-quality nylon, which is both lightweight and robust, providing that extra length to stretch if needed. A stretchy inner cord is seamlessly combined with high-quality webbing and velcro to securely fasten around the paddle shaft. At the opposite end, a sturdy stretchy cord is employed to secure the leash to your chosen spot on the kayak. Additionally, the leash can be looped through the cord to secure it wherever you find it necessary. The primary purpose of the leash is to maintain paddle contact with the kayak during fishing or diving activities. -
Sale!
The TracPort Dash 350 turns one StarPort into three. Supplied with the StarPort Bridge Support for added rigidity, it will lock into place on your StarPort firmly, and increase your work space. StarPorts can be loosened and slid along the track to the correct position. -
Sale!
The Bixpy Outboard Remote Control V2 is for all Outboard Batteries that have blue LED battery status lights The remotes features forward and reverse speeds in addition to a "dead stop" button. -
Sale!
With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.- Outer Shell material: ETFE Laminate
- Connection point: barrel connector
- Charges the PP-378 in: 6 to 10 hours
- Includes two anchor attachment points
- Waterproof and dirt-proof with corrosion-resistant components
- Fresh and saltwater ready
-
Sale!
Is your fishing rod out of reach or just a tad too close? Get the RAILBLAZA Rod Holder Extender and never miss a strike. Its adjustable extension gives you up to 125mm extra, so you can make your setup ergonomically better and get to your rod faster than ever.- Extend your rod holder 125mm for greater flexibility and range
- Get the perfect angle and setup for any boat, inflatable, belly boat, SUP or kayak
- Enjoy corrosion-resistant construction for a longer product life span
-
Sale!
Don’t miss a second of the action – get the RAILBLAZA Camera Mount Adapter and capture amazing shots with ease. No need for bulky, expensive mount systems – this cleverly designed adaptor fits all 1/4-20 thread inserts, is compatible with GoPro cameras and ensures you never miss that perfect moment.- Compatible with GoPro cameras and 1/4-20 cameras
- Makes cameras RAiLBLAZA StarPort compatible
- RAILBLAZA Base not included
-
Sale!
Ready to take your Lowrance HOOK2 4x or 5x fishing game to the next level? Look no further than the RAILBLAZA Fish Finder Mount R-Lock Hook 2 With its tilting and removable design, 3 axis mount feature, friction joints, and adjustable angle – you can be sure that your display is secure and level for an optimal experience.- Allows Lowrance HOOK2 4x and 5x models to become StarPort compatible
- Single hand display tilting
- Features R-Lock joints
- Accepts fish finders up to 1.5kgs
- StarPort base not included
-
Sale!
Keep your fish finder in check with the RAILBLAZA Fish Finder Mount R-Lock S, designed specifically to securely mount your chart plotter or fish finder and withstand rough waters.- Securely mounts fish finders and chart plotters with square or round bases
- Fits most fishfinder brands
- Friction joints and adjustable 15° increments for stability
- Low profile mount leaves deck space clear
- 3 axis mount for all sorts of fishing vessels
-
Viking Kayak Lashing Hook (38mm) screws included -
Sale!
The RAILBLAZA G-Hold range holds varying sizes of poles, tools and bundles – like fishing rods, shovels, boathooks, grubbers, electric fence standards, oars, paddles, spearguns…you get the idea. Available in 35mm, 50mm and 75mm sizes.- Three diameters to choose from – 35, 50 or 75 mm.
- They install in any RAILBLAZA StarPort.
- The flexible quick-release strap has two securing points for minimum and maximum diameters, providing strong retention.
- Sold in singles, while two are recommended for linear use on longer accessories
- Base not included
-
Sale!
The Hobie Twist & Stow Rudder Adapter replaces the Hobie Twist & Stow rudder with a Bixpy Rudder that enables you to mount a Bixpy J-2 Motor to your kayak’s rudder assembly. Steering is conveniently controlled using the steering handle.The Hobie Twist & Stow Rudder Bixpy J2 Adapter is very easy to install, with no holes or overly complex modifications required. Compatible with the newer J2 Bixpy Motor only. The beauty of this mounting system is that it will not sacrifice the MirageDrive, providing dual means of propulsion, and provides propelled steering capability. -
Sale!
The RAILBLAZA G-Hold range holds varying sizes of poles, tools and bundles – like fishing rods, shovels, boathooks, grubbers, electric fence standards, oars, paddles, spearguns…you get the idea. Available in 35mm, 50mm and 75mm sizes.- Three diameters to choose from – 35, 50 or 75 mm.
- They install in any RAILBLAZA StarPort.
- The flexible quick-release strap has two securing points for minimum and maximum diameters, providing strong retention.
- Sold in singles, while two are recommended for linear use on longer accessories
- Base not included
-
Sale!
The Bixpy Pole Steering can be used with any of the Bixpy WillFit™ Adapters that offer a 1" vertical pipe (the blue pipes). This includes the Power Pole WillFit™ Adapter, the Universal Kayak & Canoe Adapter, the Hobie® Pro Angler / Compass WillFit™ Adapter and the Transom WillFit™ Adapter. -
Sale!
Revolutionise your StarPort system with the ultra-durable and swivel-friendly Adaptor Kit! Now you can attach any RAILBLAZA accessory quickly and easily, so all of your mounting needs are taken care of. Get yours now and take your setup to the next level.- Instantly make any item StarPort compatible
- Easily attach RAILBLAZA accessories
- 360° swivelling with ease
- Stainless steel hardware for extreme durability
- StarPort base sold separately
-
Sale!
The RAILBLAZA TracPort Dash 500 is meant for the serious angler who needs to fit a wide variety of accessories into very little space. The TracPort Dash 500 turns two StarPorts into four, allowing you to add extra rod holders, mobi holders, cup clams, etc. -
Rudder T bar for Viking Javlin and Oxygen -
Sale!
Product description
-
Sale!
Description
- The 150 mm deep hatch bucket is ideal for storing larger cell phones and for 7ah batteries that are often used to power fish finders.
- The yellow bucket fits inside our standard Viking hatch. except for the smaller Ozzie model as there is not enough clearance.
-
Sale!
The Bimini RailMount is the perfect way to secure your RAILBLAZA products no matter what type of tube you have. This easy-to-install mount fits square and round tubes, so you can take on any adventure. Think smarter, not harder. -
Sale!
Limited Stock AvailableWhat's The Difference Between Bixpy PP-77-AP And Any Other Lithium Battery?
The major difference is that Bixpy PP-77-AP is Lithium Iron phosphate. They have far longer lifespans. Up to 10 years. They also have both 5V and 12V output with the 12V with a Max output of 20 Amps, which is great for things like inflatable pumps (10A battery will not run most pumps). Also, it’s a better fit and finish and additional connectors and more suited for the use. Fully water proof in aluminum housing. There’s a battery level indicator, cigarette lighter outlet, switched cable with a water proof switch and built in super fact USB outlet. So a Lithium Battery it is just a battery. Where as the PP-77 is a finished product with features and user interface. -
Sale!
Viking Kayak Saddle & Screws- Nylon Saddle measures 35mm
- Add extra saddles to your kayak as attachment points for seats, leashes, dry bags etc.
-
Replacement nose clip for Bixpy J-1 PowerShroud™ Motor. This is a sacrificial piece that will break off in case of a hard impact and will need to be replaced. -
Sale!
Make every outdoor adventure even easier and more enjoyable with our Adjustable Extender R-Lock. Now featuring two rotating R-Lock friction joints and a knuckle joint that tilts in 15° increments, you can be sure your gear is secure and adjusted to fit any situation. So get out there and explore with confidence – your Adjustable Extender R-Lock has got you covered.- Adjustable Extender offers full circle free rotation of accessories
- Offers tilt for accessory positioning
- Elevates accessory 75mm
- Snap locking security mechanism
- Base not included
-
Sale!
Keep the style, ditch the hassle. With Hook 25, you can safely and securely hang whatever you need – from your fishing line to your favourite coat – no matter where you are. Get yours today and make adventures a little easier.- Never lose your gear or fishing line again
- Easy to use and install
- Take up minimal space
- Versatile and multifunctional
-
Sale!
Bayonet style closure, much easier to use than a threaded type. O-ring permanently fitted to base To make fitting easy and completely waterproof also order the self adhesive gasket and screw set. -
Sale!
Two C-Tugs, one bar – let’s double the fun with the C-Tug Double Up Bar. This lightweight cart lets you haul bigger, heavier kayaks or boats, quickly and easily. Even in tight spaces, the Double Up Bar will make big hauls feels like a breeze. -
Sale!
Let the adventure begin with ScreenGrabba’s R-Lock Tablet Holder. Lightweight and secure, this tablet holder makes it easy to relax in style and enjoy all your entertainment needs on-the-go. Keep your device safe with adjustable arms and neoprene rubber pads for a high gripping power no matter where you go.- Simple, cost-effective, and flexible way mount iPad or other tablets
- Adjustable in size for different tablet sizes or casing sizes
- Compatible with all RAILBLAZA bases for easy re-tasking
- Bases sold separately
