-
Sale!
Schrader Valve The inflation adaptor allows you to hook a compressor up to inflate your Sup board. The ultimate way to avoid pump fatigue, and acheive optimum operating pressure of 25psi + CAUTION: regulate to avoid overinflation. The inflation adaptor fits in the palm of your hand, and works with any standard shrader valve (car tyre) fitting. In our opinon an essential accessory to have on hand all the time. -
Sale!
Replacement charger for Bixpy Outboard Batteries that have a 2-pin charging port, including the PP-378 batteries supplied with J-2 Bixpy Outboard Motor Kits -
Connector caps protect your connectors during storage and transportation. When your motor is in use, remove your connector caps to prevent them from coming loose and getting lost. The Bixpy Connector Caps are held to the connector body with a small tether, that will not withstand the force of water while the Bixpy J-2 Motor is in use. So it is best to remove them while motoring. -
Inside o-ring for main power cables for all Bixpy Motors and batteries. -
Bixpy’s rudder cover plate for Hobie Pro Angler fishing kayaks is sturdier than the regular type, designed specifically as a sturdier mounting platform for a RAM ball to be mounted to facilitate the fitting of a Bixpy Universal Kayak / Canoe Adapter -
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
Sale!
The Hobie Twist & Stow Rudder Adapter replaces the Hobie Twist & Stow rudder with a Bixpy Rudder that enables you to mount a Bixpy J-2 Motor to your kayak’s rudder assembly. Steering is conveniently controlled using the steering handle.The Hobie Twist & Stow Rudder Bixpy J2 Adapter is very easy to install, with no holes or overly complex modifications required. Compatible with the newer J2 Bixpy Motor only. The beauty of this mounting system is that it will not sacrifice the MirageDrive, providing dual means of propulsion, and provides propelled steering capability. -
Sale!
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
Sale!
Your Bixpy Magnetic Kill Switch - Pro Edition is used to turn your Bixpy Outboard Battery on and off and can also be used to run your motor in case you lose or damage your remote control. This version of our magnetic kill switch is recommended for those who regularly go into salt water. -
Sale!
The Bixpy Outboard Remote Control V2 is for all Outboard Batteries that have blue LED battery status lights The remotes features forward and reverse speeds in addition to a "dead stop" button. -
Sale!
The Bixpy Pole Steering can be used with any of the Bixpy WillFit™ Adapters that offer a 1" vertical pipe (the blue pipes). This includes the Power Pole WillFit™ Adapter, the Universal Kayak & Canoe Adapter, the Hobie® Pro Angler / Compass WillFit™ Adapter and the Transom WillFit™ Adapter. -
Replacement nose clip for Bixpy J-1 PowerShroud™ Motor. This is a sacrificial piece that will break off in case of a hard impact and will need to be replaced. -
Sale!
Limited Stock AvailableWhat's The Difference Between Bixpy PP-77-AP And Any Other Lithium Battery?
The major difference is that Bixpy PP-77-AP is Lithium Iron phosphate. They have far longer lifespans. Up to 10 years. They also have both 5V and 12V output with the 12V with a Max output of 20 Amps, which is great for things like inflatable pumps (10A battery will not run most pumps). Also, it’s a better fit and finish and additional connectors and more suited for the use. Fully water proof in aluminum housing. There’s a battery level indicator, cigarette lighter outlet, switched cable with a water proof switch and built in super fact USB outlet. So a Lithium Battery it is just a battery. Where as the PP-77 is a finished product with features and user interface. -
This adapter will allow you to attach the Bixpy Motor onto your paddle board or kayak within minutes. -
Sale!
The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your Bixpy Motor directly onto the rudder.- Mounts into any standard rudder 10mm pin hole
- Gravity deployment system
- 90° quick Slide & Stow feature
- Gravity "Lock-down" mechanism for reverse speeds
- 18in. x 4in. rudder blade
- Kick up feature for shallow water and hazards
- Removable cap for mounting Bixpy Jet Motor
- The top of the pin to the top of the motor measures 12.25 inches or 305 mm
- Pin length is 85 mm. Gap from pin to blade is 38 mm
- To work effectively, the Bixpy motor needs to be about 2" to 3" below waterline
-
The Pipe Locking Bracket is perfect for locking any stern mounted pole adapter in place for situation where you need your motor to hold position. The steering adapter bolts onto the vertical pipe swivel sleeve and tightens using stainless steel screws. Then the locking pin inserts into the gap of your pole clamp to lock your motor in the desired direction. -
Sale!
With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.- Outer Shell material: ETFE Laminate
- Connection point: barrel connector
- Charges the PP-378 in: 6 to 10 hours
- Includes two anchor attachment points
- Waterproof and dirt-proof with corrosion-resistant components
- Fresh and saltwater ready
-
Sale!
Centre well cover - Profish 400 Clear Lid with Bait Board - a must for your Profish 400 Centre Console Bin. Simply access you're bin by unhooking the bungey loops. The tough clear cover means that you can see what is inside before you open it up! -
Sale!
The K&S Superior Paddle Leash is the ultimate paddle leash, crafted using high-quality nylon, which is both lightweight and robust, providing that extra length to stretch if needed. A stretchy inner cord is seamlessly combined with high-quality webbing and velcro to securely fasten around the paddle shaft. At the opposite end, a sturdy stretchy cord is employed to secure the leash to your chosen spot on the kayak. Additionally, the leash can be looped through the cord to secure it wherever you find it necessary. The primary purpose of the leash is to maintain paddle contact with the kayak during fishing or diving activities. -
Sale!
KAYAK KIT is a complete care pack for rigid or inflatable kayaks. Step 1 is a super fast acting cleaner and Step 2 is a shine enhancing, anti-static coating to reduce resistance in the water, you'll actually feel the difference! STEP 1: Is a specially formulated mix of low foaming detergents to gently remove salt, algae and mud staining from inflatable or rigid kayak. -
Sale!
KAYAK KIT is a complete care pack for rigid or inflatable kayaks. Step 1 is a super fast acting cleaner and Step 2 is a shine enhancing, anti-static coating to reduce resistance in the water, you'll actually feel the difference! STEP 2: Is a mix of thinned wax's and shine enhancers that quickly bond to the surface and help to fill scratch marks or imperfections giving less resistance in the water. -
Sale!
Leak-proof Performance:
The adapter is made of high-quality plastic materials and is resistant to pressure. It is long-lasting, with strong sealing and leak-proof performance and superior air leakage performance.Lightweight and Portable:
Because the adapter is lightweight and portable, it is easy to carry and store; there is no need to carry multiple types of inflating equipment. The multi-function valve adapter can suit all of your requirements and lighten your load.Wide Application:
The adapter is suited for all types of surf paddle boards, canoes, kayaks, inflatable boats, and inflatable beds.Easy to Inflate:
The adaptor makes it simple to inflate and deflate boats. With the gasket inside, there will be no air leakage between the adapters.Fast Connection:
The adapter allows for a quick connection between the hand pump valve adaptor and other valve adapters. -
Viking Kayak Saddle & Screws- Nylon Saddle measures 35mm
- Price is for 1 x Nylon Saddle plus 2 x S/S Self Tapping Screws (no pre-drilling required)
- Add extra saddles to your kayak as attachment points for seats, leashes, dry bags etc.
-
Sale!
- Drip Rings
- A good all-round paddle for general use.
- Handy notched blades are useful when fishing around mussel farms as you can pull yourself back by hooking over the ropes to reduce drifting
- Shaft can be unclipped to reduce length which makes it easier to fit into your vehicle
- Total length 223cm
