Buy a Viking Profish • Get real on-water coaching included.
Viking Flush Mount Rod Holder
$25.00
Upgrade your kayak with genuine Viking Flush Mount Rod Holder.
Designed for strength, clean integration and waterproof performance, these rod holders sit flush in your kayak and are fully sealed at the base — perfect for offshore, estuary and serious fishing setups.
Includes foam gasket and self-tapping screws for secure installation.
Description
Viking Flush Mount Rod Holder
Built for serious kayak anglers.
If you're setting up your Viking kayak properly, flush mount rod holders are one of the cleanest and most practical upgrades you can make.
These genuine Viking Flush Mount Rod Holders are designed to sit securely inside your kayak, creating a strong, low-profile rod storage system that keeps your deck clean and functional.
❔Why Choose Viking Flush Mount Rod Holders?❔
Fully Sealed Base
The bottom is completely sealed, making them ideal for kayak installations where waterproof integrity matters.
No open tube. No unwanted water ingress.
Integrated Internal Gimbal Pin
The molded internal gimbal pin prevents rod rotation — especially useful offshore or when trolling.
Built for Strength
Durable construction designed for real fishing conditions — not just light-duty use.
Perfect for offshore fishing, estuary sessions, trolling and bait fishing.
❔Why Choose Viking Flush Mount Rod Holders?❔
Fully Sealed Base
The bottom is completely sealed, making them ideal for kayak installations where waterproof integrity matters.
No open tube. No unwanted water ingress.
Integrated Internal Gimbal Pin
The molded internal gimbal pin prevents rod rotation — especially useful offshore or when trolling.
Built for Strength
Durable construction designed for real fishing conditions — not just light-duty use.
Perfect for offshore fishing, estuary sessions, trolling and bait fishing.
Gear Tip (Highly Recommended)
Don’t lose a rod — add a Rod Leash to every flush mount holder
Flush mount rod holders are strong — but rods can still get ripped out by a strike, a wave, or a sudden knock. A rod leash is the simplest “insurance policy” you can add to your setup.
- Helps prevent rod loss during trolling, drift fishing, and rough water
- Ideal for offshore & bay sessions where one mistake is expensive
- Stainless steel hardware — built for saltwater use
Pro tip: Most anglers run one leash per rod holder — it keeps your setup tidy and ready for serious fishing.
Technical Specifications
Flange dimensions: 59mm wide × 100mm long
Required internal clearance: 145mm
Internal rod tube depth: 135mm
Sealed bottom construction
Molded internal gimbal pin
Includes foam gasket and #12 self-tapping screws
What’s Included
1 × Viking Flush Mount Rod Holder
Foam gasket
#12 self-tapping screws
Ready-to-install setup
🎯 Who Is This For?
✔ Kayak anglers wanting a clean, factory-style installation
✔ Offshore paddlers needing secure trolling rod placement
✔ Anyone upgrading from clamp-on rod holders
✔ Builders customizing their fishing layout
⚠ Installation Requirements
Installation requires cutting a 2-inch hole into the kayak deck.
Basic tools needed:
Drill
2-inch hole saw
File / Dremel
Screwdriver
If you're not comfortable cutting into your kayak, consider professional installation.
❓FAQs
What tools do I need to install a flush mount rod holder?
To install flush mount rod holders you’ll need a drill, a 2″ hole saw bit, and a file or Dremel for clean edges.
You’ll also use the self-tapping screws (included) plus a marker for templating. Basic hand tools make the job straightforward.
Can any Viking kayak be fitted with these rod holders?
Most Viking kayaks with enough internal clearance (145mm) can be fitted.
Always measure inside the kayak before cutting the deck — if in doubt, contact us for guidance.
Will cutting holes weaken my kayak?
Properly cut and sealed flush mount rod holders will not weaken your kayak.
The sealed base helps protect against water ingress, and the rod holder design helps distribute load away from stress points.
Do I need to seal the cut edge?
Yes. Using the included foam gasket and ensuring a snug, sealed fit with screws helps prevent water entry and maintains the kayak’s waterproof integrity.
How high above the deck will the rod holder sit?
Flush mount holders are designed to sit mostly level with the kayak deck.
Some slight protrusion is normal to allow rod access, but it remains low-profile.
Can these be used for trolling?
Yes. Flush mount rod holders are ideal for trolling and holding rods securely while paddling or using an electric motor.
The built-in gimbal pin helps keep rods upright and stable.
Are these compatible with aftermarket rod accessories?
Yes. Many anglers pair flush mount rod holders with rod leash clips, PVC rod tubes, or aftermarket hold-down brackets
for added security on offshore or rock fishing trips.
How do I maintain the rod holders?
Rinse with fresh water after saltwater use, check screws occasionally, and ensure the gasket remains snug.
The sealed base requires minimal ongoing maintenance.
Can I install these myself or should I hire someone?
If you’re comfortable with basic tools and cutting a 2″ hole, DIY installation is straightforward.
If you’re unsure or want a perfect finish, a qualified kayak technician or boat shop installation is recommended.
Ready to Upgrade Your Fishing Setup?
Install professional-grade Viking Flush Mount Rod Holders and transform your kayak into a cleaner, more efficient fishing platform — ideal for trolling, offshore sessions, or bay fishing.
About brand
Viking Kayaks are designed and built in New Zealand with a clear focus on adventure, performance, and family fun on the water. Renowned for their tough construction and smart, practical layouts, Viking offers a wide range of recreational and fishing kayaks — from compact, easy-to-handle models for kids and families to fully rigged fishing platforms built for demanding conditions.
At Kayak and SUP, we proudly stock some of the most popular Viking Kayaks available in Australia, including the Profish series, the versatile 2+1, and the lightweight Espri. These kayaks are proven in Australian conditions, from calm waterways to surf launches and offshore use, and we’re here to help you choose the right setup for how and where you paddle. Whether you’re heading offshore to chase fish or enjoying a relaxed paddle with the family, Viking Kayaks are trusted for their stability, safety, and reliability every time you hit the water.
Shipping & Delivery
Shipping & Delivery
We deliver Australia-wide with reliable courier and freight partners. Small items are shipped via standard parcel services, while kayaks and bulky gear travel with our specialised freight network to ensure safe handling and fast delivery.
- Most accessories are dispatched within 1–3 business days.
- Kayak freight times vary depending on location — check our Freight & Pickup Locations for details.
- Need more info? Read our full Shipping Information page..
- Shop confidently with our 90-Day Return Guarantee.
All shipments are tracked for your peace of mind.
