-
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!
- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
Sale!The Bixpy Outboard Remote Control V2 is for all Outboard Batteries that have blue LED battery status lights The remotes features forward and reverse speeds in addition to a "dead stop" button.
-
Sale!Insulated Fish Bag - Profish Kayaks
- Fully insulated Fish Bag keeps your catch cool and in great eating condition, add ice (salt flake ice is best).
- Fits the rear well of your Profish 400 Profish 400, Reload, GT & Replay.
- Made from durable PVC with sturdy zips.
-
Out of stockNow with 'Toe Tab' foot controls for superior control. The 'Angler' blade works brilliantly - there is no need for an up haul. For installation instructions go to the 'How To' section. Will fit any of the Viking Profish kayaks A rudder system will make your kayak much easier to manage in windy conditions and also when paddling in strong currents.
-
Sale!
- Drip Rings
- A good all-round paddle for general use.
- Handy notched blades are useful when fishing around mussel farms as you can pull yourself back by hooking over the ropes to reduce drifting
- Shaft can be unclipped to reduce length which makes it easier to fit into your vehicle
- Total length 223cm
-
Out of stock
- Propelz Speed two piece Fibreglass Paddle
- Fully adjustable for length & blade angle
- Drip Rings
- Handy notch in blade
- Comes apart to fit in car
- Adjustable length - 220 - 230cm
-
Sale!This SUP cover has all the important features to keep your beloved SUP safe including uv reflective tarpee, 5mm shock-absorbing foam, handle, a protective nose panel, a deck slit to access your SUP handle and a fin slot. You can trust that the Barry Basic will keep your SUP well protected. The bag can fit 1 board.
- EXTRA PROTECTION : Extra Tough 600D protective fabric in high impact areas. Top Side (Nose & Tail) / Bottom Side (Nose).
- UV REFLECTIVE TARPEE : Thick, heavy duty outer fabric. Water proof, UV and stain resistant designed to reflect heat and protect boards.
- THREE LAYERS OF PROTECTION : Top Layer: Thick UV reflective tarpee / 2nd Layer: Shock-absorbing foam. / 3rd (inside) Layer: Tarpee lining.
- SHOULDER STRAP : Barry Day : Nylon dog clip at nose end and strap can be stashed inside cover. Barry Double: Totally detachable.
- HEAVY DUTY ZIPPERS : Large, non-corrosive nylon zips.
- HANGING HOOK : All covers supplied with patented removable hanging hook.
- REFINED TEMPLATE SHAPE : Updated template shapes. Refined to suit current board shapes.
-
Sale!Paddle board / SUP board bags. Many sizes available.
- 10mm padding top and bottom
- Full opening zipper. Easy to put paddle board in and out of the bag
- Velcro fin slot
- Padded shoulder strap
- Tuff handle
- Pocket on the inside of bag
-
The kayak paddle drip ring is used to prevent excess water from flowing down the paddle shaft without paddle movement.
- Adopting quality rubber material, the kayak paddle drip ring is durable, solid and strong enough.
- Easy to install on the port and starboard side of paddles.
- Ideal drip rings keep excess water from running down the paddle shaft while out on paddling excursions.
- Coming with 4 pcs in a package, you can use them for long time, and it is very practical.
- Fit for most kayak canoe paddles. Inner diameter: approx. 30mm/1.18inch.
- Suitable for 1-1/8" to 1-1/4" diameter shafts.
-
Sale!For Stand up paddle board (SUP), Dinghy Boat, Surfboard, Inflatable Kayaks and boats and more...
-
This kit contains all the parts required to install a fish finder in to a Profish Reload Tackle Pod. Including the transducer fit kit, battery straps plus the waterproof fuse holder and terminals. You will need to use 'MS All 202 Sealant by Holdfast' to waterproof the transducer scupper and cable entry points. Installation instructions are under the 'How to' tab on this website.
-
Sale!The FPV-POWER 12v 2A Standard Wall Charger is the same charger that comes supplied with our battery combos. Purchase as spare or replacement for 17.5AH and 7AH Battery.
-
Sale!Ready to take your Lowrance HOOK2 4x or 5x fishing game to the next level? Look no further than the RAILBLAZA Fish Finder Mount R-Lock Hook 2 With its tilting and removable design, 3 axis mount feature, friction joints, and adjustable angle – you can be sure that your display is secure and level for an optimal experience.
- Allows Lowrance HOOK2 4x and 5x models to become StarPort compatible
- Single hand display tilting
- Features R-Lock joints
- Accepts fish finders up to 1.5kgs
- StarPort base not included
-
Sale!The Viking Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines. Waterproof silicone recommended, but not included.
-
Out of stockSimply wrap the spectra loop around the centre of your paddle shaft then thread clip through to secure. Use the stainless clip to attach the leash to your kayak *clipping to one of the seat saddles or to the safety grab line, are good options Keeps your paddle with your kayak!
-
Sale!
Gill Pro Racer Buoyancy Aid (4916).
The Gill Pro Racer Buoyancy Aid has been developed to be lightweight, with minimum bulk, and to be as comfortable as possible. It's shaped to allow full freedom of movement during fast-paced racing conditions, and it is fully adjustable to enable a snug fit against your body. -
Sale!Blade is Ultra’s budget paddling vest that is high on features.
- The internal belt system
- Adjustable shoulders
- Australian Standards Approved
- 150d Rip stop
- PE Foam Buoyancy
- Heavy duty 25mm belts
- Reinforced & bar tacked stress points
- Internal Belt System
- Lanyard attachment point
- Double Stitched & Bound seams
- Multi-Fit Design