Viking Hatch Base Kit 150mm – Ring + Gasket + Screws

$19.95

The Viking Hatch Base Kit includes the mounting ring, fitted yellow O-ring, foam deck gasket and six stainless steel screws for a compatible 150 mm bayonet hatch. Reuse your lid if it still locks and seals properly.

Description

Viking Hatch Base Kit for 150 mm bayonet hatches

The Viking Hatch Base Kit replaces the mounting ring on a compatible 6-inch Viking bayonet hatch. It includes the black base ring with its fitted yellow O-ring, a foam deck gasket and six stainless steel screws. Reuse your original lid if its locking tabs and sealing surface are in good condition.

Choose the right Viking hatch part

The fitted O-ring seals against the lid. The foam gasket seals the joint between the base and the kayak deck. Choose this kit if the base is cracked or distorted, or if its fitted O-ring is damaged.

For worn foam under an otherwise sound base, choose the Viking hatch foam gasket and screws. If the lid is damaged too, see the complete Viking 6-inch hatch kit.

🔧 Pro Tip
Wipe grit and salt off the O-ring and the lid’s mating surface after paddling. Check for cracking, flattening or a loose fit when you clean the hatch.

Viking Hatch Base Kit fit and care

How do I check the size?

Viking specifies a 155 mm opening, 172 mm deck cut-out and 204 mm outside rim for the 6-inch bayonet hatch. Measure the old hatch and compare the screw pattern and lid tabs. Similar cut-outs can use different locking systems.

Can I replace just the yellow O-ring?

Viking describes the O-ring as permanently fitted to its 6-inch base. This kit supplies a new base with the seal fitted, so you can keep a compatible lid that still locks securely.

How do I check the seal after fitting?

Make sure the base sits evenly, the foam gasket stays flat and the lid locks without forcing it. Check for leaks on shore before relying on the hatch. Keep electronics in a separate dry bag.

💡 Maintenance Value
Inspect the lid, base and foam separately. Replacing the worn part lets you keep fittings that still close and seal properly.

💬 Call to Action
Not sure if this fits your kayak? Contact us and we’ll help confirm compatibility in no time.
📞 0410 520 267 |
✉️ [email protected]
About brand
  Viking Kayaks are designed and built in New Zealand with a clear focus on adventure, performance, and family fun on the water. Renowned for their tough construction and smart, practical layouts, Viking offers a wide range of recreational and fishing kayaks — from compact, easy-to-handle models for kids and families to fully rigged fishing platforms built for demanding conditions. At Kayak and SUP, we proudly stock some of the most popular Viking Kayaks available in Australia, including the Profish series, the versatile 2+1, and the lightweight Espri. These kayaks are proven in Australian conditions, from calm waterways to surf launches and offshore use, and we’re here to help you choose the right setup for how and where you paddle. Whether you’re heading offshore to chase fish or enjoying a relaxed paddle with the family, Viking Kayaks are trusted for their stability, safety, and reliability every time you hit the water.
Shipping & Delivery