-
Out of stockNow with 'Toe Tab' foot controls for superior control. The 'Angler' blade works brilliantly - there is no need for an up haul. For installation instructions go to the 'How To' section. Will fit any of the Viking Profish kayaks A rudder system will make your kayak much easier to manage in windy conditions and also when paddling in strong currents.
-
Sale!Insulated Fish Bag - Profish Kayaks
- Fully insulated Fish Bag keeps your catch cool and in great eating condition, add ice (salt flake ice is best).
- Fits the rear well of your Profish 400 Profish 400, Reload, GT & Replay.
- Made from durable PVC with sturdy zips.
-
This kit contains all the parts required to install a fish finder in to a Profish Reload Tackle Pod. Including the transducer fit kit, battery straps plus the waterproof fuse holder and terminals. You will need to use 'MS All 202 Sealant by Holdfast' to waterproof the transducer scupper and cable entry points. Installation instructions are under the 'How to' tab on this website.
-
This kit contains all the parts required to install a fish finder in to a Profish 400 kayak. Including the transducer fit kit, the battery straps plus the waterproof fuse holder and terminals. You will need to use 'MS All Clear by Holdfast' sealant to waterproof the transducer scupper and cable entry points. To see how this is fitted follow the instructions in our "How To" guide.
-
The Depth Finder & Transducer Mount Kit has been developed for kayak anglers needing an easy way to install and remove fish finders or depth finders. With this kit you can install and uninstall your fish finder or depth finder in a matter of seconds, no messy adhesives or excessive drilling of fittings required. With our extensive selection of mounts this kit can be adapted to fit any kayak or canoe.
- Enables a 100% true unobstructed reading
- Easy installation and removal allowing you to protect your sounder when transporting it.
- Add an extension for deeper water
- Choose a RAILBLAZA base to suit your needs.
-
Out of stockThe RAILBLAZA TracPort Dash 500 is meant for the serious angler who needs to fit a wide variety of accessories into very little space. The TracPort Dash 500 turns two StarPorts into four, allowing you to add extra rod holders, mobi holders, cup clams, etc.
-
Sale!Streamline your excursion with RodStow Triple rod holder system: easy to install in minutes, modular design with storage caddies and offset mountings available for larger reels. Outfit your boat the right way and make the most of your days on the water.
- Storage caddy for lures, traces and other tackle
- Tube size 40mm (1.57in) inside diameter
- Can holds gaffs, boat hooks or nets
- Removable gimbal pin to stop rod rotation
- Made from UV Stabilised, fibreglass reinforced engineering polymers
- Fits all rod lengths
- Stainless steel screws
-
Sale!This light and strong pole fits into StarPort or common top-handle winch fittings, Whether you need to mount a diving flag or just proudly display your allegiance to your club, sport, country or hoist the Jolly Roger, it’s the perfect solution.
- Can be securely fastened to any common top-handle sailboat winch
- Can be installed into a StarPort
- Can easily be removed, transported and refixed at another location
-
Sale!Effortlessly install a RAILBLAZA HEXX™ live transducer pole, HEXX heavy duty fish finder, or the strike-ready HEXX Rod Holder into gunnel track systems.
- Fit heavy-duty RAILBLAZA HEXX™ products to the gunnel tracks of your boat including Tracker, Crestliner and many more!
- Compatible with HEXX Live Pole 60 & Live Pole 30, HEXX Fish Finder Mount, HEXX RotatingPlatform and HEXX Rod Holder.
-
Sale!Keep your fish finder in check with the RAILBLAZA Fish Finder Mount R-Lock S, designed specifically to securely mount your chart plotter or fish finder and withstand rough waters.
- Securely mounts fish finders and chart plotters with square or round bases
- Fits most fishfinder brands
- Friction joints and adjustable 15° increments for stability
- Low profile mount leaves deck space clear
- 3 axis mount for all sorts of fishing vessels
-
Sale!Upgrade your fishing experience with the RodStow Double – perfect for boats of all sizes. Get easy access to your rods, with stainless steel hardware and a removable gimbal pin so you can get right out on the water. Plus, store all your tackle and lures in one place with our modular system. Make sure you don’t leave home without it.
- Storage caddy for lures, traces and other tackle
- Tube size 40mm inside diameter
- Can holds gaffs, boat hooks or nets
- Removable gimbal pin to stop rod rotation
- Made from UV-stabilised, fibreglass reinforced engineering polymers
- Fits all rod lengths
- Stainless steel screws
-
Sale!Ready to take your Lowrance HOOK2 4x or 5x fishing game to the next level? Look no further than the RAILBLAZA Fish Finder Mount R-Lock Hook 2 With its tilting and removable design, 3 axis mount feature, friction joints, and adjustable angle – you can be sure that your display is secure and level for an optimal experience.
- Allows Lowrance HOOK2 4x and 5x models to become StarPort compatible
- Single hand display tilting
- Features R-Lock joints
- Accepts fish finders up to 1.5kgs
- StarPort base not included
-
Sale!Make every outdoor adventure even easier and more enjoyable with our Adjustable Extender R-Lock. Now featuring two rotating R-Lock friction joints and a knuckle joint that tilts in 15° increments, you can be sure your gear is secure and adjusted to fit any situation. So get out there and explore with confidence – your Adjustable Extender R-Lock has got you covered.
- Adjustable Extender offers full circle free rotation of accessories
- Offers tilt for accessory positioning
- Elevates accessory 75mm
- Snap locking security mechanism
- Base not included
-
Sale!Make attaching accessories to your inside or outside rails a breeze with the RailMount 32-41 from RAILBLAZA. Perfect for all recreational and marine activities, this high-end product is designed with convenience in mind. Plus, it’s the preferred mounting base for Hobie Adventure Island and Pro Angler models.
- RailMount 32-41 acts as accessory base on round and square 32mm rails and round 41mm rails
- Preferred mounting base of Hobie Adventure Island and Pro Angler owners.
- Comes complete with adaptors, rubber grips, and self-adhesive grip tape
- Accepts any RAILBLAZA StarPort accessory
- Features slide locking mechanism
- Installation hardware included
- Available in black or white
-
Out of stockSimply wrap the spectra loop around the centre of your paddle shaft then thread clip through to secure. Use the stainless clip to attach the leash to your kayak *clipping to one of the seat saddles or to the safety grab line, are good options Keeps your paddle with your kayak!
-
Sale!Make more room on your pontoon boat with the RAILBLAZA Pontoon Boat RailMount 28-32. This revolutionary base mount securely and easily attaches any StarPort RAILBLAZA accessories to your rails. It comes with all installation hardware, so there’s no drilling required – just attach, move and go.
- Rubber inserts avoid slippage when attached to rails
- StarPort locking slide secures accessories in place
- UV stabilised plastic
- Unique design avoids interference with rail wall
-
The Platform can be used as a flat surface to make many items StarPort compatible, meaning these items can all be plugged in and locked in place on your inflatable, kayak, sailboat or any other place that will take a StarPort. The platform comes with pre-moulded screw holes, or more holes can easily be drilled, it allows you to tilt items 180 degrees, in 15 degree increments.
- Makes DIY projects StarPort compatible
- Fits any StarPort Mount
- 180-degree tilt adjustment
-
Out of stockReady to take your outdoor adventures to the next level? The RailMount 19-25 has you covered. It’s the perfect fit for 19-25mm rails, and comes with all you need for easy installation, including all stainless steel hardware.
- Rail Mount 19-25 acts as accessory base on 19 or 25mm rails
- Comes complete with adaptors, rubber grips, and self-adhesive grip tape
- Accepts any RAILBLAZA StarPort accessory
- Features slide locking mechanism
- Installation hardware included
- Available in black or white
-
Sale!This Ocean&Earth coiled paddle cord is designed to keep your paddle tethered to your surf ski, kayak or canoe. The Surf Ski Paddle Coil Cord is suitable for all paddle sports. 7mm coiled urethane. Moulded ends. Attach your paddle to your kayak & you'll never have to decide which one to swim after.
-
Out of stockThe Solution Paddle gloves are great for protecting your hands from the harsh elements. These articulated neoprene paddle gloves have pre-bent fingers and a grip pattern on the palm to help maintain grip. The neoprene will keep your hands warm if you paddle in colder weather. To reduce the chance of getting blisters make sure they fit perfectly.
- UPF50+ for extreme protection against the sun
- Contoured double-layered palm in high wear areas
- Soft supple material helps improve grip with your paddle
- 2mm neoprene adjustable cuff helps maintain flexibility in the wrist
- Great protection against colder weather, sun and blisters
- Pre-bent natural grip fingers
- Grip pattern on palm
-
Sale!Fit heavy duty RAILBLAZA HEXX™ products to horizontally mounted tracks using only a screwdriver with the HEXX Kayak Track Mount. Perfect solution for installing to all kayak tracks including Hobie, Old Town, NativeWatercraft, Perception Kayaks, Wilderness Kayaks and more.
- Quick Instal with a screwdriver, no drilling
- Compatible with factory-fitted kayak tracks
- Fit heavy duty RAILBLAZA HEXX™ products to horizontally mounted tracks
- Compatible with HEXX Live Pole 60 & Live Pole 30, HEXX Fish Finder Mount, HEXX Rotating Platform and HEXX Rod Holder
-
Sale!Get the perfect angle and flexibility for your next adventure with the RAILBLAZA Rotating Platform S. Easily adjust your devices, like depth finders, GPS systems and more, with one hand and get just the right angle every time. Plus, it’s easy to install into any StarPort base.
- Rotating Platform S holds GPS devices and depth finders in place
- Rotates a full 360°
- Made from UV proof plastics
- Base sold separately
-
Sale!Ready to explore more with your inflatable boat, SUP, or cooler? QuikPort by RAILBLAZA has got you covered. The powerful 3M VHB self-adhesive pad ensures an easy and fast setup for light-duty applications without drilling a single hole. Transform the way you accessorise for camping and boating trips and take your adventures to a whole new level.
- Easy installation
- Includes 3M VHB self-adhesive pad
- Can be mounted anywhere
- No need to drill holes
-
Sale!Don’t let bulky boat mounts take up valuable deck space and time. Check out the revolutionary Rotating Platform R – the ultimate tool for mounting fishfinders and chart plotters with U-shaped brackets, giving you the ability to quickly and easily mount and remove items. Make your boating or angling dreams a reality with the Rotating Platform R, compatible with many popular brands including Lowrance Hook2 and Lowrance HDS.
- Mount and remove your fish finder, chart plotter or depth finder quickly and easily
- 360° rotation for easy viewing
- Compatible with many popular brands including Lowrance Hook2, Lowrance HDS, Lowrance Elite, Garmin Striker Plus, Garmin Echomap, Humminbird Helix, Humminbird ICE Helix
- Low profile RAILBLAZA mount