FREE Australia-wide shipping on inflatable kayaks • Shop now
Jaspara Slide and Lock Fin Glue-On Fin Box
$59.00
The Jaspara Slide and Lock Fin Box is a glue-on centre fin mount for compatible PVC inflatable kayaks and SUPs.
The kit includes a fin box, PVC cover, tracking fin and 30 mL of PVC cement. A motor and its matching adapter are separate. Check the hull and mounting position before bonding.
Glue-on slide and lock fin box for inflatables
The Jaspara Slide and Lock Fin Box adds or replaces a centre fin mount on a compatible PVC inflatable kayak or SUP. The supplied fin slides into the box and helps the craft hold a straighter line while you paddle.
Check the hull material and fitting area before bonding. If you already have an intact Slide and Lock mount, match the fin or motor adapter to that mount first.
Why Add a Fin Box?
• Dramatically improves straight tracking
• Reduces side-to-side drift
• Increases paddling efficiency
• Improves stability in wind
• Enables electric motor compatibility
If you're serious about upgrading performance, this is one of the most effective modifications you can make.
Check the motor adapter and hull compatibility
For a Bixpy K-1 or J-2, use the separate Bixpy Slide & Lock Fin Adapter where the craft supports a motor. For ASIWO U1, check that the supplied plate is the Slide and Lock version.
Confirm with the kayak or SUP manufacturer that the hull and bonded mount can take the motor before fitting.
What’s included
- Slide and Lock fin box
- PVC fin box cover
- Slide and Lock tracking fin
- 30 mL PVC cement
Ideal For
• Inflatable SUPs
• Inflatable kayaks
• Entry-level inflatables needing better tracking
• Converting inflatables to motor-ready systems
Installation Notes
Surface preparation and correct adhesive curing are critical for long-term durability.
❓FAQs
Can I install this on a stand-up paddleboard (SUP)?
Yes, on a compatible PVC inflatable SUP. Check the hull material and bonding location before fitting.
Can I use it as part of a 3-fin (thruster) setup?
Yes — it can be installed as the centre fin in a thruster configuration.
Note: It is not designed as a small side-bite fin box. If you need side fins, dedicated smaller fin boxes are recommended.
Can I install this on an inflatable kayak?
Yes, if the inflatable kayak has a compatible PVC hull and a suitable bonding surface for a centre fin.
Will this improve tracking?
Yes — significantly. A properly positioned centre fin increases directional stability and reduces constant paddle correction.
Is it difficult to install?
Installation is straightforward, but surface preparation and correct adhesive curing are critical for long-term durability.
For best results, we recommend following proper PVC bonding procedures and allowing full curing time before use.
Is the glue included?
Yes. The kit includes a 30 mL tube of PVC cement.
Can I use this with a Bixpy K1 or ASIWO U1 motor?
Use a separate Slide and Lock adapter for a Bixpy K-1 or J-2, or check that your ASIWO U1 has the matching plate. Confirm that the kayak or SUP manufacturer allows a motor on the bonded mount.
Tip: Check the adapter type before ordering.
Can this be installed on rigid (hard shell) kayaks?
No. This product is designed specifically for inflatable/PVC watercraft.
Where should I position the fin box for best performance?
For best results, install the fin box centred along the keel line toward the rear third of the board or kayak.
Incorrect placement can reduce stability or cause unwanted handling changes, so measure carefully before bonding.
Want better tracking (or motor compatibility) on your inflatable?
Add a Slide & Lock fin box to improve straight-line tracking and unlock compatibility with fin-box electric motors like Bixpy K1 or ASIWO U1.
Jaspara represents over 17 years of paddling experience, customer feedback, and innovation. Designed and tested in Australia, Jaspara kayaks are built using top-quality components and refined through real on-water trials to ensure comfort, balance, and performance.
Each kayak is individually inflated and tested for seven days to guarantee reliability and durability. From handles to footrests, every detail has been carefully positioned for an effortless paddling experience. At Kayak and SUP, we’re proud to bring you Jaspara — a brand created by paddlers, for paddlers.
Shipping & Delivery
We deliver Australia-wide with reliable courier and freight partners. Small items are shipped via standard parcel services, while kayaks and bulky gear travel with our specialised freight network to ensure safe handling and fast delivery.
- Most accessories are dispatched within 1–3 business days.
- Kayak freight times vary depending on location — check our Freight & Pickup Locations for details.
- Need more info? Read our full Shipping Information page..
- Shop confidently with our 90-Day Return Guarantee.
All shipments are tracked for your peace of mind.
Related products
Propelz Eco Kayak Paddle – 2-Piece 223cm
Viking 4 pcs Rubber Universal Paddle Drip Rings | Kayak & SUP
$4.95 – $14.95Price range: $4.95 through $14.95
Palm Kola PFD
RAILBLAZA Replacement C-Clip Slide Lock
$5.50 – $6.95Price range: $5.50 through $6.95